🔥 NEW SHIRTS - vtuned.com/products/new-vtuned-turbo-t-shirt

Cut holes out of that back seat for subs and finish it off with black carpet

Aw man, that blue interior was nice. Everybody and their mom converts their interior to black...

Lots of love from nepal i love to watch ur video burlt im waiting for mustang new episode

OMG the adverts half way through and I have had 4....

Love the contrast of interior!😍

halfe a million ! congrats!

I would have put the seats back in and trimmed around the cage

vTuned, you should do a longer, slower type ( not slow-mo ) but, slow and show the shirt from different angles. Some panning of the turbo image. They will sell like cupcakes.

Cool building

Celaning the carpet ? no no no no ! extraction vacum this method is good for granpas with one year old car for sure.

A little off topic but I was wondering if you are related to the goonzquad boys? Are your pops brothers?

that looks goooood

when you are so focused and hold the spray can cap in hand , just make me want to laugh 😂

when you find a position for the seat, it is pretty common to build a brace between the harness bar and the back of the seat. Really stabilizes the seat. Project looks great so far...good idea dyeing the carpet. don't forget dynamat under the panels

Would paint the blue black or cover....the blue looks weird with all the black

really good looking interior.

That shopvac seen some shiiiyeeett.

I'm trying to find out what artist and song starts at 12:56. I love that track.

Invest in an extractor and a tornador for better detailing.

I DONT LIKE FORD BUT I BEEN WAITING AND WAITING ON THAT MUSTANG BRO. COME ON NOE. MAKE ME A BELIEVER.

in kentucky they literally moved whole cities/towns up out of the flood zones to stop wasting monies every year to repair damaged properties/homes/businesses...........www.kentuckytoday.com/stories/fema-looking-to-purchase-flood-prone-homes-in-kentucky-town,15831

Love your videos man 🤙🏼

Like you said, leave the back panel design, but paint it black to match the carpet, the blue cage will set the interior off nicely.

I would have coated the rear shelf with resin. Then stretched black fleece material over it. Revolted the fleece with more resin using a roller. Leave to dry...no more speaker holes!

There are so many things wrong with this roll cage. Please do some research on how to properly design, fabricate and install a a cage into a sedan. The hardware you are using needs to be hardened, you must use a backing plate. The main hoop MUST have a solid cross bar that goes from behind drivers head to the bottom of the hoop closest to the floor behind the passenger. the rear supports should be mounted into the wheel wells, not the seatback backs. That steel is no structurally strong enough to support in the event of an accident. A cage NEVER mounts on top of carpet!!! That is actually against every sanctioning bodies rules governing how to properly install a cage! It has to be metal to metal contact. Even in showroom stock racing, you have to cut the carpet for the cage to mount to the steel even when bolted to the car. Still need backing plates and correct hardware.

Wear a mask when you go into a store!

17:30 Hey Ben open a PO Box I'll send you some new Sharpie 😂😉

You should put some sound deadening under the carpet, bed liner alone isn't gonna cut it!

loving the build so far mate..

If you're into watching someone clean things then paint it with a $4 rattle can, this video is right up your alley!

what we're gonna do now is paint the carpet ok now what we're gonna do is paint the carpet ::paints carpet:: ok we just painted the carpet fire your editor please

JandJ out of Wichita, KS??? John Ross, Tyler Hoover and Car Wizard might ger jealous. LOL! 😜😝😂

Should make a board like the bottom half take the seat brackets off the seat and use them on the board to hold onto the wall and then wrap it in carpet

Name of the paint please

perfectly, just perfectly

Like the style of this video

I think you should paint the back black

You guys need a contour gauge for all those custom irregular shape cutouts like the rear seat MDF. They are cheap and the result is professional looking fitment.

Why don’t you sell 5xll in shirts

I would recommend putting in some good sound deadening

You can fit a nice subwoofer on the back seat there....

Excited to see the complete build 😎

So I'm gonna go ahead and write a perfect comment for you guys. So I went ahead and wrote this awesome comment and next up I'm gonna go ahead and click the super cool "comment" button. So I went ahead and clicked the awesome "comment" button for you guys..... Naaah just kidding. Love this channel :-)

mantap bos. bos ada kerja.an ga buat saya.???

Like SMASHED!

Waiting for mustang video👀

No respiratory protection while spraying paint. 🚫

Hola soy de Argentina buenos Aires te sigo siempre nome pierdo un capítulo sos un maestro como dejas los autos Saludos men

You definitely should of put down some sound deadener before you put the carpet and the other interior parts in. Definitely would help with all the noise from outside

I think you should have use acétone on thé vinyles before repeinting it

Death trap :( This cage is dangerous in case of front or side hit. It might only help while rolling over.

10:52 I knew it was gonna happen. He will regret it . 😂.

I thought you were going to razor your wrists, it got pretty close!

how to get this vehicle licensed on the road?

You risked it for a biscuit spraying the carpet! Great video again Vtuned

Put carpet unstead of that mdf pannel and insulation foam. It will look amazing. Thumbs up its coming together. I can't wait to see tge LS engine running this built, it will be a beast!

How many of you thought he said “media ford”. When actually he said “mdf board”. 🤔

I would suggest framing out the back panel and leaving plexiglass window to show off the metal stamp work designs. It will allow you to highlight the designs while adding some sound barrier at the same time.

👍🏼👍🏼👍🏼👍🏼

Vtuned, if you are going to use the car on the track officially, I think you better check the rules I'm sure that the roll cage has to be welded in not bolted or the scrutineers will NOT Pass it. Tony from Western Australia

Auwrite Ben! You'll surely be ready for drifting "bad" as Uncle Sam, at the LS Fest in Bowling Green Kentucky by next fall..

Dope channel !

Definitely put carpet on the back wall of the seat

Can I get a shout out plz

New fan

V, you need a contour gauge to make those tricky cuts like on that back mdf, and engine firewall of the mustang... they're cheap and way faster and easier than cardboard templates...

with all that black you gonna need an AC😂😂

Barbasol foam shaving cream works wonders for cleaning carpet

Flock the dash. Would look killer

Great work man!

When spraying carpet you brush it in one direction first spray it then brush it in the other direction and spray it again then if it needs another coat you brush it 90^ to they way you did before. That way you get all the strands fully coated.

Great Job!!! Thank You... :-)

You’re lame for the amount of ads

Less paint runs when painting carpet...lol

put your Vtuned logo in the back.

Surprised you didn't jet wash the carpets first? Looks really good and coming along nicely. Carpet the back and leave the cage Black.

get it bruh!

25:21 he says sparcoo seat and it's recaro🤣🤣

Great job... I would carpet that back piece and color match the roll cage to the car.. I think it would pop more that way.. leaving that back piece exposed, the lames are not going to understand

Do similar shapes to that mdf as is in back firewall

You could just paint the back black, you keep the color flow plus keep the cool design 😎

I think it looks awsome dude ! And hey, wrap the backseat panel to, it will increase the Finnishness to spot on ! 👌🏻

Gotta love V. No sheets or blankets down just spray it on the floor of the garage. Adds character lol. Nice job mate

the square edges on the MDF is killing me

I think it would look so much better if you carpeted the back as well. But it looks great, keep up the good work 👍

I think you should just polish the cage up little and clear coat it

Paint the pattern in the back seat panel black

Car looks good coming on realy nicely i no this video hours out already i get my notification hours later as I'm from South Africa 👌

Paint the back designs in black to give it a nice look seen that panels and floor carpert looks good nice work on the e30 Vtune keep it up

Wrap the roll bar in carpeting or matte black rubber tubing for sound dampening

Man... you did an amazing job! ^______^

I was doing the same thing a couple months ago with my ‘85. I bought it with no interior other than two junk racing seats and a dashboard. I’ve been using my ‘88 parts car and swapped the whole interior. I used the same paint you used for my back panel with the speakers, swapped the dash from the ‘88 and painted it along with the console. Side back panels weren’t too bad and I haven’t gotten to the door panels yet. The seats from the parts car are pretty rough, but I kinda like the aged look on certain things. I painted the whole interior with rust reformer paint after patching some holes in the floor pan, I think it looks pretty good as I’m not using the carpet. I used bed liner on the footwell areas and have been painting the engine bay lately. I also undercoated the whole driver side and wheel wells so far. Mine isn’t gonna have a roll cage or cool motor or anything, but it’s looking a lot better. I also had to fix a lot of the normal things the car should have(dome lights, horn that works, power locks, cruise control, washer fluid reservoir and pump, rear seat belts, etc.) The previous owner had cut all the wiring and deleted all that stuff so it’s been a pain, but I’ve learned a lot about the e30’s in the process. There are differences in the interior, seat belts, and wiring, gauge clusters between my two e30’s which have given me issues but I’m making progress. I loved watching you work on the Mustang as the first Mustangs are my favorite, but seeing you guys working on your e30’s is more enjoyable because you’re doing a lot of the things I’ve been doing. You definitely have better resources and talent than I do though. Keep up the great work.

are ya'll going to fix the dash?

Looks good brother... keep up the good work

Enjoyed the video. Too bad there was a creepy uncle Joe add that ruined it , good job V!

When are you going to finish the Mustang?

11:27 Why not weld the nuts to the underplate? :)

25:22 PMSL. The car is coming along really nicely. Unsure about the rear being left uncarpeted though. As the carpet is quite thin, you could still get the contours to show though. Apply the adhesive to the car and the carpet, let it dry off, and you will be able to lay it across and use a spoon (best thing) to stretch the carpet into the recesses. I think that would look quite good.

really interesting man loving it